|
Danelectro Parts
For warranty
issues, parts for effects, pedals or other Danelectro
accessories click
here .
Note: These are the only Danelectro parts we have available.
If you do not see what you need please do not contact us as we do
not have any other Danelectro parts. Actual packaging may be different from that shown in
photo. Item number needed when
ordering. Please refer to the Buy It page for complete shipping
details. We do not give
refunds on parts unless item is defective.
SCHEMATICS  SCHEMATICS
MODIFY YOUR DANO TO
A SITAR!
"THE ORIGINAL" LIPSTICK®
PICKUP
Aged magnet. 4.0K ohms.
Measurements: Pickup
(tube only) length: 3-1/8" / Height: 1/2" /
Mounting bracket (end to end) length: 3-1/4" / Mounting
bracket width: 1/2"
What is a Lipstick Pickup?
(1) pickup @
$40.00 / item:
LSPU-1
(2) pickups @
$75.00 / item:
LSPU-2
USA
shipping: $6.00 (same price for one or two
pickups)
Canada shipping: $9.00 (same price
for one or two pickups)
International shipping:
$14.00 (same price for one or two
pickups)
When ordering multiple items,
please contact us for a reduced shipping
rate.
6 STRING CHROME GUITAR BRIDGE w/ ROSEWOOD
SADDLE
 
Fits 59-DC,
56-U2, 56-U1, Doubleneck
Installation tips: The two flathead
screws (not included) go under the top of the
bridge and NOT through the bridge holes. Roundhead screw (not
included) goes through bridge hole. Screw in
the two flathead top screws so that the underside of the
bridge is a minimum of 1/16 inch distance away from the body of the
guitar. Start bottom side adjustment of bridge so that you can slide
a medium thickness pick between the bridge and the body. Fine tune
your adjustments from here. The neck must be removed to access the
truss rod. Turn truss rod adjustment only 1/4 turn over a
24 hour period to avoid damage to the
neck.
$30.00 / item:
SB-5805
USA shipping:
$6.00
Canada shipping:
$7.00
International shipping:
$9.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
ADJUSTABLE /
INTONATING CHROME GUITAR
BRIDGE
 
1/5/8" wide x
3-1/2" long (top of
bridge)
7/8" = distance between
strings
2-1/8" = distance
from E to E
Fits Danelectro models 59-DC, 56-U1,
56-U2, DC-3, 56-U3, Mod 6, Doubleneck and Guitarlin models. This is the
replacement for the rosewood saddle
bridge.
This intonatable bridge has
individual saddles. Each saddle has two screws, one for
height adjustment and one which locks the saddle
in place and allows the saddle to be positioned for correct
intonation. It also seems to help sustain and
resonance if you screw the central fixing screw hard down so the
back of the bridge sits on the top of the body.
Installation tips: Two flathead
screws (not included) go under the top of the
bridge and NOT through the bridge holes. Roundhead screw (not
included) goes through bridge hole on the bottom. Screw
in the two flathead top screws so that the underside of
the bridge is a minimum of 1/16 inch distance away from the body of
the guitar. Start bottom side adjustment of bridge so that you can
slide a medium thickness pick between the bridge and the body. Fine
tune your installation adjustments from here.
Tip for
adjusting the bridge: The locking screw sits directly under
the string so to stop the saddle shooting forward you need to
slacken the string before you unlock it. It also seems to help
sustain and resonance if you screw the central fixing screw hard
down so the back of the bridge sits on the top of the
body.
$45.00 /
item: SB-5800
USA shipping:
$6.00
Canada
shipping: $7.00
International
shipping: $9.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
ADJUSTABLE / INTONATING 12 STRING CHROME GUITAR
BRIDGE
 <
Click to enlarge
Fits
Danelectro DC-12 and Hodad 12 string
2-1/16" spacing.
$75.00 / item:
SB-5328
USA shipping:
$6.00
Canada shipping:
$7.00
International
shipping: $9.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
ADJUSTABLE / INTONATING CHROME BASS
BRIDGE
String spacing:
11/16 inch / E string to G string = 2
inches
Installation tips: Two flathead
screws (not included) go under the top of the
bridge and NOT through the bridge holes. Roundhead screw (not
included) goes through bridge hole 0n the bottom. Screw in the two flathead top screws so that
the underside of the bridge is a minimum of 1/16 inch distance
away from the body of the guitar. Start bottom side adjustment of
bridge so that you can slide a medium thickness pick between the
bridge and the body. Fine tune your adjustments from here.
$45.00 / CHROME / item:
BB-3815
USA shipping:
$6.00
Canada shipping:
$7.00
International shipping: $9.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
4
STRING BASS BRIDGE w/ ROSEWOOD SADDLE
Installation tips: Two flathead
screws (not included) go under the top of the
bridge and NOT through the bridge holes. Roundhead screw goes
through bridge hole on the bottom. Screw in the
two flathead top screws so that the underside of the
bridge is a minimum of 1/16 inch distance away from the body of the
guitar. Start bottom side adjustment of bridge so that you can slide
a medium thickness pick between the bridge and the body. Fine tune
your adjustments from here. The neck must be removed to access the
truss rod. Turn truss rod adjustment only 1/4 turn over a
24 hour period to avoid damage to the
neck.
$32.00 / item:
BB-3810
USA shipping:
$6.00
Canada shipping:
$7.00
International shipping: $9.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
ROSEWOOD SADDLE FOR GUITAR OR BASS
For right-handed or
left-handed.
 < Click to enlarge
$9.00 / item:
BP-2805
USA shipping:
Priority Mail - $6.00 / First
class - $2.50
Canada shipping:
$6.00
International
shipping: $7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
CONVERTIBLE (REISSUE) BRIDGE
Fits
Danelectro Convertible reissue manufactured between
1998-2001.
This is a custom, handmade bridge and is superior to the original
factory made bridge. The saddle has notches for each string to
prevent slipping. The bridge is made out of east Indian rosewood. No
modification necessary to your guitar, simply swap out the factory
bridge with this bridge. Includes allen key.
  
$55.00 / item:
CONVB-R
USA shipping:
Priority Mail - $6.00
Canada shipping:
$7.00
International
shipping: $8.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
CONVERTIBLE BRIDGE
Fits vintage
Convertible (pre-late 1960's) with 3 per side tuners. Accomodates 2-3/32" (54mm) string spread on
the saddle. Note: This
bridge will not fit on the late 1960 Convertible with six in-line
tunes.
This is a custom, handmade bridge for a
vintage Danelectro
Convertible. This bridge is superior to the original
factory made bridge. The saddle has notches for each string to
prevent slipping. The bridge is made out of east Indian rosewood. No
modification necessary to your guitar, simply swap out the factory
bridge with this bridge. Includes allen key.
$55.00 / item:
CONVB-V
USA shipping:
Priority Mail - $6.00
Canada shipping:
$7.00
International
shipping: $8.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
GOTOH SITAR BRIDGE
Danelectro
Sitar
Modification
 
Spacing between
strings is 3/8"
Click for video #1 / Click for video #2
The above left
photo shows a 56-U2 first reissue with the Gotoh sitar bridge installed plus a
short, chrome tailpiece (next item listed). The Gotoh bridge
installs using three screws. With a little adjustment it does
the electric sitar thing extremely well. Here's a good string
suggestion: Curt Mangan Nickel-Steel 10 gauge.
$75.00 / item:
SB-5810
USA shipping:
$6.00
Canada shipping:
$7.00
International shipping: $8.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
SHORT CHROME TAILPIECE
FOR SITAR MODIFICATION
This item is currently on
backorder. Please check back later.
$25.00 /
item: TP-0429-010
USA shipping:
$6.00
Canada shipping:
$7.00
International shipping: $8.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
This item is currently on backorder.
Please check back
later.
ALUMINUM GUITAR
NUT
 
Length = 1-5/8" / Width = 3/8" / Distance from E to
E = 1-3/8" / Thickness = 1/8"
From a
customer: '"The
Danelectro aluminum nut works well on old Silvertone amp-in-case
guitars. It's not as wide and the little screw that it comes
with is too short and narrow (just used the old one anyway),
but all in all it's a lot better than what originally came with the
guitar and has solved all the problems I've been
having."
$9.00 / item:
G-NUT
USA shipping:
Priority Mail - $6.00 / First
class - $2.50
Canada shipping:
$5.00
International
shipping: $7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
ALUMINUM BASS NUT
1-5/8" x 3/8" x
1/8"
$9.00 / item:
B-NUT
USA shipping:
Priority Mail - $6.00 / First
class - $2.50
Canada shipping:
$5.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
ALUMINUM LEFT-HANDED BASS NUT -
Rare!!
1-5/8" x 3/8" x
1/8"
Very limited supply remaining as
this item is no longer manufactured.
(1) remaining in stock
- LAST ONE!
$15.00 / item:
B-NUTL
USA shipping:
Priority Mail - $6.00 / First
class - $2.50
Canada shipping:
$5.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
STACKED CONCENTRIC POT
 
1meg/100K
with nut and washer
(1) pot @
$12.00 / item: EP-4868
(2) pots @
$24.00 / item: EP2-4868 (shipping price is the same for two
pots)
USA shipping: Priority Mail -
$6.00 / First class -
$2.50
Canada shipping: $5.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
CONCENTRIC / STACKED KNOBS
Large Cream &
Small Brown
 Sorry, this item is
out of stock until futher
notice.
 .
CONCENTRIC / STACKED KNOBS
Large Brown
& Small Cream
Sorry, this item is
out of stock until futher
notice.
OUTPUT JACK
$6.00 /
item: EP-0055
USA shipping: Priority Mail - $6.00 /
First class -
$2.50
Canada shipping: $5.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
SELECT-O-MATIC 6 POSITION SWITCH
for DC-3 and
56-U3
$15.00 / item:
EP-4352
USA shipping: Priority Mail -
$6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping: $8.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
STRAP BUTTONS
(PAIR)
$5.00 /
item: AP
0670-010
USA shipping: Priority Mail - $6.00 /
First class -
$2.50
Canada shipping: $5.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
JACKPLATE
Note:
Screws are no longer included in the package.
$8.00 / item:
AP-0609
USA shipping: Priority Mail -
$6.00 / First class -
$2.50
Canada shipping: $5.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Style Side Body Binding
Trim
Fits all
Danelectro double cutaway reissues except
Convertible.
  3click on image to
enlarge
Width = 1-1/4" / Length =
72"
Same
look and texture as the side trim that was used on the
vintage Danos and Silvertones of the 50's and 60's.
APPLICATION:
-
Remove neck and strap buttons from
instrument.
-
Stretch out trim bottom side up on flat surface in a
well ventilated area.
-
Secure ends of trim while applying a good adhesive such
as 3M™ Super 77™ Multipurpose Adhesive. (This adhesive is
sold at office supply stores, hobby shops and
online).
-
Spray Super 77 generously on the trim ONLY
and not on instrument.
-
Allow adhesive to get tacky.
-
Spray on more adhesive if necessary but make sure it
dries long enough to get very tacky
(sticky).
-
With the neck and strap pegs removed, apply trim avoiding pulling or
stretching.
-
Using a razor knife with a new blade, carefully cut
trim around neck joint.
-
Optional: Trim can easily be stained to create an aged
look.
$20.00 / item:
SBT-1472
USA shipping: Priority
Mail - $6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping: $7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Style Side
Body Binding Trim
Fits all Danelectro single
cutaway reissues except Convertible.
 3click on image to
enlarge
Width = 1-1/4" / Length =
54" / Please measure your guitar before ordering!
Same look and texture as the side trim that was
used on the vintage Danos and Silvertones of the 50's and
60's.
APPLICATION:
-
Remove neck and strap buttons from
instrument.
-
Stretch out trim bottom side up on flat surface in a
well ventilated area.
-
Secure ends of trim while applying a good adhesive such
as 3M™ Super 77™ Multipurpose Adhesive. (This adhesive is
sold at office supply stores, hobby shops and
online).
-
Spray Super 77 generously on the trim ONLY
and not on instrument.
-
Allow adhesive to get tacky.
-
Spray on more adhesive if necessary but make sure it
dries long enough to get very tacky
(sticky).
-
With the neck and strap pegs removed, apply trim avoiding pulling or
stretching.
-
Using a razor knife with a new blade, carefully cut
trim around neck joint.
-
Optional: Trim can easily be stained to create an aged
look.
$15.00 / item:
SBT-1454
USA shipping: Priority
Mail - $6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping: $7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Style Side
Body Binding Trim
Fits all vintage single cutaway
Danelectro and Silvertone.
Width = 1-5/16" / Length = 54" / Please
measure your guitar before ordering!
Same look and texture as found on those vintage Danos and
Silvertones from the 50's and 60's. Fits Vintage Danelectro
and Silvertone single cutaway
models.
APPLICATION:
-
Remove neck and strap buttons from
instrument.
-
Stretch out trim bottom side up on flat surface in a
well ventilated area.
-
Secure ends of trim while applying a good adhesive such
as 3M™ Super 77™ Multipurpose Adhesive. (This adhesive is
sold at office supply stores, hobby shops and
online).
-
Spray Super 77 generously on the trim ONLY
and not on instrument.
-
Allow adhesive to get tacky.
-
Spray on more adhesive if necessary but make sure it
dries long enough to get very tacky
(sticky).
-
With the neck and strap pegs removed, apply trim avoiding pulling or
stretching.
-
Using a razor knife with a new blade, carefully cut
trim around neck joint.
-
Optional: Trim can easily be stained to create an aged
look.
$15.00 / item:
SBT-51654
USA shipping: Priority
Mail - $6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping: $7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Style Side Body Binding
Trim
Trim width and length to fit your
custom project.
Width = 1-5/8" / Length = 72" / Please measure your
guitar before ordering!
Same look and texture as found on those Danos and Silvertones
from the 50's and 60's. Width can need to be trimmed to fit
your custom
project.
APPLICATION:
-
Remove neck and strap buttons from
instrument.
-
Stretch out trim bottom side up on flat surface in a
well ventilated area.
-
Secure ends of trim while applying a good adhesive such
as 3M™ Super 77™ Multipurpose Adhesive. (This adhesive is
sold at office supply stores, hobby shops and
online).
-
Spray Super 77 generously on the trim ONLY
and not on instrument.
-
Allow adhesive to get tacky.
-
Spray on more adhesive if necessary but make sure it
dries long enough to get very tacky
(sticky).
-
With the neck and strap pegs removed, apply trim avoiding pulling or
stretching.
-
Using a razor knife with a new blade, carefully cut
trim around neck joint.
-
Optional: Trim can easily be stained to create an aged
look.
$20.00 / item: SBT-5872
USA shipping: Priority
Mail - $6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Buy one, get one
free!
Body Binding Tape in Cream - self
adhesive
Stained for aged appearance.
Fits all
reissues from 1998-2008 except Danelectro Convertible (see next
listing below)
Width: 1-1/4" x Length: 63" / Please
measure your guitar before ordering!
Note: For easiest
application, remove neck and strap buttons from instrument.
$11.00 / item: 2BBT-1463 -
Buy one, get one
free!
USA shipping: Priority
Mail - $6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping: $7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Side
binding tape lifting? Here's a helpful video:
http://velocitycreative.com/dano
Body Binding Tape in Cream - self
adhesive
Fits Danelectro Convertible
Width: 1-1/2" x Length: 80" / Please
measure your guitar before ordering!
Note: For easiest
application, remove neck and strap buttons from instrument.
$11.00 / item:
LT4940-028
USA shipping: Priority
Mail - $6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping: $7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Body Binding Tape in Brown - self
adhesive
Width: 1-1/4" x Length: 80" /
Please measure your guitar before ordering!
Please measure your guitar before
ordering!
Note: For easiest application remove neck
from guitar.
$11.00 / item:
LT4940-036
USA shipping: Priority Mail -
$6.00 / First class -
$2.50
Canada shipping: $6.00
International
shipping:
$7.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Danelectro Neck -
Fits all 21 fret
reissues!
Click on any image to
enlarge.
Click on any image to
enlarge.
Click on any image to enlarge.
 
-
21 fret neck fits ALL first re-issue Danelectros
and all 21 fret Danelectros since the first
reissues.
-
Satin black neck & headstock
-
Maple neck
-
Upgraded Gotoh style sealed tuners
-
Adjustable truss rod
-
Aluminum nut
-
25"
scale
-
Width at last fret:
2-1/4"
-
Made in
China
$150.00
/ item: DRF-BK
Shipping within continental USA: $16.00
Canada shipping: $25.00
International shipping: $58.00
When ordering
multiple items, please contact
us for a reduced
shipping rate.
Danelectro Baritone Neck with Sealed
Tuners
 
-
22 fret neck fits ALL first re-issue Danelectros
and all Danelectros since the first reissues.
-
Maple neck
-
Upgraded Gotoh style sealed satin
tuners
-
Adjustable truss rod
-
Aluminum nut
-
22 frets
-
Width
at last fret: 2-1/4"
$150.00 / item:
BARI-SEALED
Shipping within continental USA:
$16.00
Canada shipping: $25.00
International shipping:
$58.00
When ordering multiple items, please contact us for a reduced shipping rate.
Danelectro Shortcale Bass Neck
-
Fits first reissue longhorn bass (1998-2001)
-
24 fret neck short scale bass
neck
-
Measurement at base (neck pocket): 2-1/4" x 1"
-
Natural finish maple neck &
headstock
-
Danelectro "D" style
tuners
-
Adjustable truss
rod
-
Aluminum
nut
$130.00 / item:
BNECK-SS
Shipping within
continental USA: $16.00
Canada
shipping: $25.00
International shipping:
$58.00
When ordering
multiple items, please contact
us for a reduced
shipping rate.
Danelectro 59-DC, DC-3,
Convertible Neck
-
21 fret neck fits first
re-issue 59-DC, DC-3 and re-issue Convertible neck
(1998-2001)
-
Will also work on first
re-issue 56-U2.
-
Measurement at base (neck
pocket): 2-1/4" x 1"
-
Natural finish maple neck &
headstock
-
Danelectro "D" style
tuners
-
Adjustable truss
rod
-
Aluminum nut
-
25" scale
-
Width at last fret:
2-1/4"
-
Made in
Korea
$130.00 / item:
DRF-59
Shipping within continental USA: $16.00
Canada shipping: $25.00
International shipping: $58.00
When ordering multiple items, please contact us for a reduced shipping rate.
Danelectro 56-U1
& 56-U2 Neck
Sorry, this item is no
longer available. Substitute with item
DRF-59.
-
21 fret neck fits 56-U1 and
56-U2 models
-
Measurement at base (neck
pocket): 2-1/4" x 1"
-
Natural finish maple neck &
headstock
-
Danelectro "D" style
tuners
-
Adjustable truss
rod
-
Aluminum nut
-
Made in
Korea
U2
& STANDARD BARITONE PICK GUARD
Clear with Cream Decal
Fits U2 and
Baritone
$20.00 / item:
PGU2-C (screws not included)
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$10.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
U2
& STANDARD BARITONE PICK GUARD
Clear
with Black Decal
Sorry, this item is no longer manufactured and not in
stock.
Fits
U2 reissue (1998-2001) and Baritone reissue
(1998-2001)
59-DC "SEAL" PICK GUARD
 < click to
enlarge
$22.00 / item:
PG-9842 (screws not included)
Shipping within continental USA:
$7.00
Canada shipping:
$10.00
International shipping:
$25.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
LEFT-HANDED "SEAL"
PICK GUARD
Convert that '59
righty to a '59 lefty!
 LAST ONE!!
$45.00 / item:
PG-9842L (screws not
included)
Shipping within continental USA:
$7.00
Canada shipping:
$10.00
International shipping:
$25.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
LONGHORN BASS PICK
GUARD
$12.00 / item:
PG 9843-031 (screw not included)
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$10.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
'63
DANO GUITAR or BASS PICKGUARD
$25.00 / item:
PG-63 (screws not
included)
Shipping within continental USA:
$7.00
Canada shipping:
$10.00
International
shipping:
$25.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
RUMOR BASS
PICK GUARD
2 available
$30.00 / item:
PG-RUMB (screws not
included)
USA shipping:
$7.00
Canada shipping:
$10.00
International shipping:
$25.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
GUITARLIN PICK
GUARD
4 available
$25.00
/ item: PG-MANDO (screws not
included)
USA shipping:
$6.00
Canada shipping:
$8.00
International
shipping:
$10.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
CONTROL CAVITY COVER IN CREAM
This item is
currently on backorder. Please check back later.
$15.00
/ item: PG 9846-028 (screw not
included)
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$10.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
CONTROL CAVITY COVER
IN BROWN
$15.00 / item:
PG9846-036 (screws not included)
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$10.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Style
Gotoh 3 x 3 NickleTuning Keys
 <
click to enlarge
Upgrade your Daneletro or Silvertone while maintaining
that vintage vibe with these smooth, vintage style Gotoh 3 x 3
nickle tuning keys. 15:1 gear ratio. Includes screws and
bushings.
Note: Tuners
require 3/8" Pegholes so you'll need to enlarge your existing
pegholes. Simply drill them out with a 3/8 bit. Also, the screw
holes will not match up to existing holes but will
probably cover at least one of the old holes. Fill any
uncovered hole with a plastic wood compound.
Set of 6
Tuners: $80.00 / item:
TK-0875
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$14.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Style
Gotoh 3 x 3 Nickle Tuning Keys
 < click to enlarge
Upgrade your Daneletro or
Silvertone while maintaining that vintage vibe with
these smooth, vintage style Gotoh 3 x 3 nickle tuning keys
with perloid keystone buttons 15:1 gear ratio. Includes screws
and bushings.
Note: Tuners
require 3/8" Pegholes so you'll need to enlarge your existing
pegholes. Simply drill them out with a 3/8 bit. Also, the screw
holes will not match up to existing holes but will
probably cover at least one of the old holes. Fill any
uncovered hole with a plastic wood compound.
Set of 6
Tuners: $80.00 / item: TK
0772-055
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$14.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Style
Gotoh 3 x 3 Nickle Tuning Keys
Includes screws and
bushings.
 < click to
enlarge
Upgrade your
Daneletro or Silvertone while maintaining that vintage vibe with
these smooth, vintage style Gotoh 3 x 3 nickle tuning keys
with cream keystone buttons. 15:1 gear ratio.
Note: Tuners
require 3/8" Pegholes so you'll need to enlarge your existing
pegholes. Simply drill them out with a 3/8 bit. Also, the screw
holes will not match up to existing holes but will
probably cover at least one of the old holes. Fill any
uncovered hole with a plastic wood compound.
Set of 6
Tuners: $80.00 / item: TK 0772-028
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$14.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Deluxe
Vintage Style Nickle Strip
Tuners
  
Click on any
image to enlarge.
Stay in tune while sprucing up your
Dano with these Deluxe vintage style nickle strip tuners. Two
strips with 3 tuners per strip. Post to post = 1-3/8 inches.
Includes screws and bushings.
Complete
Set: $60.00 / item:
TK-0703
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$24.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Vintage Deluxe Style
Strip Tuners
 < click to
enlarge
Vintage Deluxe Style strip
tuners. Off-white plastic oval buttons. Nickel. Two strips with
3 tuners per strip. Post to post = 1-3/8 inches. Includes screws and
bushings.
3 x 3 Set: $60.00
/ item: TK-0700
USA shipping:
$6.00
Canada shipping:
$8.00
International shipping:
$14.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Gotoh Style Chrome
Bass Tuners
Suitable replacement tuners for the Longhorn Pro
Bass and DC Pro Bass and makes a great upgrade for the standard
model Dano basses.
Set of 4
tuners: $60.00 / item:
TK0794-010
USA shipping:
$7.00
Canada shipping:
$8.00
International shipping:
$15.00
When ordering multiple items,
please contact us for a reduced shipping
rate.
Back to Top
| 
